Fast delivery within 72 Hours
Acim Nidec CTScope
CTScope is a full-featured software oscilloscope for viewing and analyzing changing values within the drive.
The time base can be set to give high speed capture for tuning or for longer term trends….
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
CTScope is a full-featured software oscilloscope for viewing and analyzing changing values within the drive.
The time base can be set to give high speed capture for tuning or for longer term trends. The user interface is based on a traditional oscilloscope making it familiar and friendly to all engineers across the globe.
Features
Four channels
Triggers
Start/Stop at absolute time
Start/Stop on value (rising/falling edge)
Channels can capture parameter values from different nodes
Scaling & offset per channel
Cursors to aid measurement
Zoom facility
Scroll/Panning facility
Save/load scope configurations with or without data
Print facility
Sample period possible down to 1ms with Turbo CTNet
Works with CT-RTU, CTNet, Ethernet (CT-TCP/IP), MD29MON and ANSI interfaces
Getting Started With CTScope Software
Specification
| Windows 2000/XP/Vista operating system. NOTE |
Windows 95/98/98SE/ME/NT4 and Windows 2003 Server are NOT supported |
|---|---|
| Features |
CTScope system requirements; Pentium III 500MHz or better recommended; Internet Explorer V5 or later should also be installed; Absolute minimum of 800×600 screen resolution. 1024×768 is recommended as a minimum; 128MB RAM; Note that you must have administrator rights to install CTScope. You do not need administrator rights to run CTScope, but this will be necessary should you wish to simultaneously run CTSoft or SYPTLite. |
Reviews
Clear filtersThere are no reviews yet.